FINGER JOINTERS MEDIUM/HIGH PRODUCTION
Our medium/high production finger jointer is the most versatile machine that Western offers in terms of production variation. You can match up a rapid stop and cut or flying saw assembly to it, depending on your production needs. (However don't get this confused with our heavy duty high production lines.) Still, this machine has all the tools and options necessary to achieve the same production of the heavy duty cast iron machine.

Material Specifications:
Thickness: 5/8" to 2" (16mm to 50mm)
Width: 1 ½" to 8" (38mm to 200mm)
Length: 4" to 36" (102mm to 914mm) - NARROW CHAIN
5 ½" to 48" (190mm to 1219mm) - WIDE CHAIN

Profile Machine:
Columns and frame are fabricated with heavy steel. Stress relieved and machined.
Variable speeding chain operates at 30 to 90 feet per minute.
120 lugs per minute.
Precision machined chain with lugs available on 6", 9", or 12" centers.
Adjustable speed crossover arm assembly with air actuated cylinder.
Apquip glue system.
Manual corner transfer with options for a powered manual or automatic corner feeder.

WITH RAPID STOP AND CUT PRESS
200' (61m) per minute maximum feed rate assembly.
16' (4.9m) standard, hydraulic squeeze, rack and pinion ejector and off bearing skids (with option to 40' press).
Pre-Assembly drive rolls pre-squeezed joints to prepare for cutting to length and final squeezing on the board press.
Built-in 7½ HP chop saw with rapid stop and cut saw.

WITH FLYING CUT OFF SAW PRESS
Over 275' (84m) per minute maximum feed rate assembly.
16' (4.9) standard, hydraulic squeeze, rack and pinion ejector and off bearing skids (with option to 40' press).
Dual pre-assembly drive rolls pre-squeeze joints to prepare for cutting to length and final squeezing on the board press.
Heavy duty flying saw carriage with 7½ HP cut-off saw.

Options and Upgrades Available